Dreambox 800HD PVR DVB-S2 Standalone Linux Digital Satellite Receiver Box - US$ 252.00

7. September 2010 15:27 by CrashingDutchman in   //  Tags: ,   //   Comments (0)


DBS-Tuner mit DVB-S2: Frequency Range  950 ~ 2150 MHz

Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)

Symbol rate DVB-S: 2 ~ 45 Mbaud/s, SCPC/ MCPC

DVB-S2: 10 - 31 Mbaud/s (8PSK) , 10 - 30 Mbaud/s (QPSK)
Video decoder: Video Compression MPEG-2 and MPEG-1 compatible, H.264

Video Formats 4:3 / 16:9

Letterbox for 4:3 TV-Device
Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3

Audio Mode Dual (main/sub), Stereo

Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog: Output Level L/R 0,5 Vss on 600 Ohm

THD > 60 dB (1 kHz)

Crosstalk < -65 dB
Output digital: Output Level 0,5 Vss on 75 Ohm

Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz

S/PDIF-Output optical, Toslink
Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm

Teletext filter in conformity with ETS 300 472 Standard
TV-Scart: Output: FBAS, RGB, S-Video
Serielle Interface RS 232: Typ RS232 bidirectional

Bitrate 115,2 kBit/s max.

Plug Connector SUB-D-9

Function: Update of Firmware
Ethernet: 10/100 MBit compatible interface

Function: Update of Firmware
Analoge modem: analoge modem for Internet connection
SATA Interface: For use either as internal HDD 2.5" or eSATAor internal 2.5" HDD
USB 2 x USB 2.0 Host on the back
LNB power and polarisation per tuner: LNB Current 500mA max.; short-circuit-protected

LNB Voltage vertical < 14V no load, > 11,5V at 400mA

LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position: DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
Power consumption: < 15W at 12V
External PSU Input:

100-240V AC / 50-60Hz / 0,6A

Output:

12V = / 3,0A

 

Buy this Dreambox for US$ 252.00


Hong kong trades

Everything electronics and more...

Month List

Page List